Saw Blades FORREST SAW BLADES Cross Cut - Table Saw & Radial Arm Woodworker I 10"x60 Tooth WOODWORKER I for Veneer Plywood (Dampener/Stiffener HIGHLY RECOMMENDED)
WOODWORKER I saw blades are designed for radial and table saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have 30° alternate top bevel (ATB) with a 5° face hook on 10" diameters and small, and 20° ATB on 12" diameters and larger.
We also offer the TCG (triple chip grind) used by Mr. Sawdust for cutting a variety of material. Available in 8", 9", 10", 12", 14" and 16" size blades.
The WOODWORKER I saw blade is made with double-hard and 40% stronger C-4 carbide for extended life between sharpenings and reduced yearly sharpening costs.
Note: Our stiffener is strongly recommended to be used against the outside of the blade for the smoothest cuts
The thin-kerf design of the WOODWORKER I saw blade:
- Saves 1/4 wood loss on each cut
- Feeds easily when used for moderate rips and crosscuts on a table saw
- Reduced "Jump In" for better "Pull-Control"
- Eliminates bottom splintering on radial crosscuts
- With new 30° ATB tooth style this blade completely stops all bottom and top splintering on ply veneers on both radial and table saw machines
10"x60 Tooth WOODWORKER I for Veneer Plywood (Dampener/Stiffener HIGHLY RECOMMENDED)
Model:
WW10607100
Diameter:
10"
Bore:
5/8"
Kerf:
3/32"
Price:
Teeth:
60
Tooth Style:
ATB
Free Ground Shipping on Orders over $49!
Three $5.00 OFF Sharpening Coupons Included with purchase.
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
See our Application Chart, or Contact Us for expert advice
