Saw Blades FORREST SAW BLADES Combination Rip & Cross Cut Woodworker II 8-1/4"x40T Woodworker II Saw Blade - SOLD OUT

WOODWORKER II saw blades are designed for table saws.

With this one all-purpose blade, you can rip and crosscut 1" - 2" rockhards and softwoods resulting in a smooth-as-sand surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates.

Features of the WOODWORKER II saw blade:

20° face hook for easy feed
Double-hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
Ends blade changing (one blade does rip, combo and crosscut)
Ends scratchy saw cuts
Ends second-step finishing
Ends cutting 1/16" oversize to allow for resurfacing
Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut)
Use 30T version if ripping mostly 2" - 3" thick hardwoods
Side wobble is held to .001" - with other brands .004/.010 is common!
RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time
Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result.. .no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine
Optional thin-kerf 3/32" width blades are available in 10" diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material