WOODWORKER II saw blades are designed for table saws.

With this one all-purpose blade, you can rip and crosscut 1″ – 2″ rockhards and softwoods resulting in a smooth-as-sand surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates.

Features of the WOODWORKER II saw blade:

– 20° face hook for easy feed
– Double-hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
– Ends blade changing (one blade does rip, combo and crosscut)
– Ends scratchy saw cuts
– Ends second-step finishing
– Ends cutting 1/16″ oversize to allow for resurfacing
– Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut)
– Use 30T version if ripping mostly 2″ – 3″ thick hardwoods
– Side wobble is held to .001″ – with other brands .004/.010 is common!
– RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time
– Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result.. .no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine
– Optional thin-kerf 3/32″ width blades are available in 10″ diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material

MOST WOODWORKER II’s ARE IN STOCK FOR QUICK SHIPMENT!